The sensors of a home robot: what manufacturers really declare
Four robots compared, four spec sheets that declare different things. Unitree G1 declares a depth camera and 3D LiDAR, 1X NEO stereo cameras and microphones with no LiDAR, Weave Isaac 1 lists no sensors. What is written on the manufacturers' pages, read on October 6, 2026.
Among the four robots in this guide there is no list of sensors that repeats itself identically. For the G1, Unitree declares a depth camera and a 3D LiDAR; for NEO, 1X declares stereo cameras and microphones, with no LiDAR; Weave, in the Isaac 1 spec sheet, lists no sensors. These are three different answers to the same question, and this guide reports what is written on the four pages, read on October 6, 2026.
This guide reports what the manufacturers write in their own product spec sheets. On who can see what, there is a separate guide: teleoperation and privacy (in Italian).
What each manufacturer declares
| Model | Vision | Depth / LiDAR | Audio | Tactile |
|---|---|---|---|---|
| Unitree G1 and G1 EDU | depth camera | 3D LiDAR | array of 4 microphones | optional, declared for G1 EDU with the Dex3-1 hand |
| Unitree R1 | monocular camera (AIR) or binocular camera (R1, R1 EDU) | not stated in the spec sheet | array of 4 microphones | not stated in the spec sheet |
| 1X NEO | dual fisheye stereo 8.85 MP at 90 Hz | not stated in the spec sheet | 4 beamforming microphones | not stated in the spec sheet |
| Weave Isaac 1 | not stated in the spec sheet | not stated in the spec sheet | not stated in the spec sheet | not stated in the spec sheet |
“Not stated in the spec sheet” means exactly this: on the product page read on October 6, 2026 that item does not appear. It does not mean that the robot lacks it.
Unitree G1: depth and LiDAR declared in the spec sheet
In the “Unitree G1 Parameter” table on the product page, the Sensing Sensor row declares “Depth Camera+3D LiDAR” for both versions, G1 and G1 EDU. A depth camera (a camera that, in addition to the image, measures how far away what it frames is) and a LiDAR (a sensor that measures distances with pulses of light, building a map of the surrounding surfaces) are two different ways of answering the same question: how far away is that object.
The same table declares an array of 4 microphones and a 5 W speaker. On tactile sensors the page is precise, and it is a precision worth reading: the note in the table says that the three-finger Dex3-1 hand can be installed with tactile sensor arrays. That hand, however, appears only in the G1 EDU column: in the G1 column the row for the hand's degrees of freedom reads “/”. Tactile sensors are therefore an option of an optional hand of the EDU version, not standard equipment.
Unitree R1: no LiDAR row in the table
The parameter table of R1 declares an array of 4 microphones like the G1, but for vision it distinguishes the versions: monocular camera for R1 AIR, binocular for R1 and R1 EDU. In the R1 parameter table, read on October 6, 2026, no LiDAR row appears.
The right place to look is the model's parameter table. The comparison between Unitree's two models is in G1 versus R1.
1X NEO: cameras and microphones, no LiDAR in the spec sheet
The Hardware section of the NEO page declares as its camera a dual 8.85-megapixel fisheye stereo camera at 90 Hz, and as microphones 4 beamforming microphones (microphones that, combined, isolate the direction a voice is coming from). The IMUs, the inertial units that measure velocities and accelerations, also appear.
In the same section, read on October 6, 2026, neither a LiDAR, nor a depth sensor, nor a tactile sensor appears. NEO is described by the manufacturer as a robot for the home.
Weave Isaac 1: the spec sheet does not mention sensors
The Product specs section of the Isaac 1 page lists battery life, charging time, Wi‑Fi connectivity, footprint, height, vertical and horizontal reach and degrees of freedom. In the same section, read on October 6, 2026, no sensor appears: neither cameras, nor microphones, nor LiDAR. On the same day, the same page states that Isaac 1 “completes tasks and navigates your home autonomously by default, with teleoperation assistance when needed to guarantee we complete tasks”.
The two things stand together on the same page, and the guide stops here: what Isaac 1 has on board cannot be inferred from what Weave does not write.
Our reading
This section is our own interpretation, and it should be read as such.
A list of sensors does not measure how good a robot is: it says which questions the machine is equipped to ask about its environment. A model that declares only cameras and a model that also declares a LiDAR deal differently with situations in which an image is not very informative — and in a home those situations exist: a dark room, a glass door, a backlit hallway.
The second observation concerns how little can be found. Among the four product pages read on October 6, 2026, only one gathers the perception sensors in a row of their own — Sensing Sensor, on the G1 — and one lists none. It is the same reason why we wrote how to read the spec sheet of a humanoid robot (in Italian): the missing items can be noticed only by putting four pages side by side.
How to check for yourself
Three rules we used to compile the table above, and which also hold for the models that are not here.
- Look at the model's parameter table, not the rest of the website. The name of a sensor in the navigation menu or on an accessories page says nothing about that robot.
- Look at which version the row refers to. Unitree R1 declares a different camera for the AIR version and for the other two; tactile sensing is declared only for the G1 EDU version, and tied to an optional hand.
- Distinguish “it does not declare it” from “it does not have it”. They are two different statements, and only the first one can be verified by reading a page.
Frequently asked questions
What sensors does a home humanoid robot have?
Does a home humanoid robot have LiDAR?
Do home robots have tactile sensors in their hands?
Why do some manufacturers not publish the list of sensors?
Sources
- Unitree — G1 product page, parameter table primary source
- Unitree — R1 product page, parameter table primary source
- 1X — NEO product page, Hardware section primary source
- Weave Robotics — Isaac 1 product page, Product specs section primary source
Next to each source we state what kind of source it is: “primary source” means the manufacturer, an official document or the author of the data; “press” a news report; “retailer” a distributor or a store, reliable about its own offer — price and availability in Italy — but not about the product’s features; “analysis” a professional firm or a research center that signs its own reading; “Chinese state media” an outlet controlled by the state, whose content should be weighed as such; “blog/forum” a non-editorial source; “unclassified” a source we have not assessed yet: the link stays, the judgment does not.